Oxygen gas high-pressure pipe

25x35mm high pressure oxygen gas hose acetylene hose industrial super wind hose band welding hose gas cutting hose

Product features.

1. Ageing resistance.

The hose is made of PVC and a small amount of LG nitrile rubber. Compared with the traditional rubber hose, it has obvious aging resistance, the surface of the rubber hose will not crack after more than five years of outdoor use, while the rubber hose usually cracks after one to two years.

2. Oil resistance.

PVC material itself determines the product has oil resistance.

3. High pressure resistance.

The working pressure is 50KG and bursting pressure is 150KG, which is far more than the working pressure required by welding and cutting air compressor and steam protection industry. With high bursting pressure, it can protect the operation, vehicles or heavy objects from careless rolling and effectively avoid pipeline damage. Traditional rubber hoses have low pressure and will crush and burst when rolled. The steel pipe used in the wind gun will flatten when rolling, resulting in deformation of the internal steel wire, which can lead to air leakage or damage to the air duct.

4, Four-season soft.

Adding cold-resistant agent in the material makes the duct have good weather resistance. It is not soft in summer and not hard in winter, so the operation is easy and free to release.

5. Good wear resistance.

The material and structure of the pipe determines that it can effectively reduce the wear and tear during use. pvc material has better wear resistance itself compared with rubber; the pipe adopts polyester thread braiding bonding process, which makes the pipe itself very light, about 30% lighter than rubber pipe. It is about 50% lighter than the steel pipe used in air cannons. Lighter weight means less wear and tear. 6.

6. light weight.

Also reduces fatigue and wear.

25x35mm high